Adsorption
Optimization of Nitrate Removal from Aqueous Solutions with ZSM Hierarchical Zeolite Modified with Amine Using Response Surface Method [Volume 10, Issue 1, 2021, Pages 13-23]
Al5083 alloy
Investigation on the Microstructure and Tensile Properties of Al5083-TiB2 Nanocomposites Produced by Stir Casting Method [Volume 10, Issue 2, 2021, Pages 45-57]
Aluminum sacrificial anode
Effect of Superheat Temperature on the Microstructure and Corrosion Behavior of Al-Zn-In Sacrificial Anode Produced by Semi-Solid Cooling Slope Casting [Volume 10, Issue 4, 2021, Pages 77-87]
Antibacterial agent
Effect of Copper Ion Incorporation on Structure and Antibacterial Properties of ZnO Nanoparticles [Volume 10, Issue 1, 2021, Pages 53-63]
Ascorbic acid
Fabrication and Characterization of Properties of Silk Fibroin Scaffold Containing Ascorbic Acid-Loaded Chitosan Nanoparticles for Bone Regeneration Applications [Volume 10, Issue 4, 2021, Pages 25-36]
AZ31D
The Effect P Content of High and Low Temperature Heat Treatment on the Properties of Ni-P-GO Electroless Nanocomposite Coating on Magnesium Alloy [Volume 10, Issue 1, 2021, Pages 33-44]
B
Biomineralization
Enhanced Biomineralization of Stem Cells and Adsorption of Extracellular Matrix Proteins on Bioactive Scaffold Reinforced with Carboxylated Multi-Walled Carbon Nanotubes [Volume 10, Issue 4, 2021, Pages 89-106]
Blade
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
Bone scaffold
Preparation and Characterization of Composite Bone Scaffold Based on Polycaprolactone and Sulfonated Silk Fibroin Nanofibers [Volume 10, Issue 1, 2021, Pages 75-84]
Bone scaffold
Enhanced Biomineralization of Stem Cells and Adsorption of Extracellular Matrix Proteins on Bioactive Scaffold Reinforced with Carboxylated Multi-Walled Carbon Nanotubes [Volume 10, Issue 4, 2021, Pages 89-106]
Bone scaffold
Fabrication and Characterization of Properties of Silk Fibroin Scaffold Containing Ascorbic Acid-Loaded Chitosan Nanoparticles for Bone Regeneration Applications [Volume 10, Issue 4, 2021, Pages 25-36]
C
Calcium phosphate deposition
Preparation and Characterization of Composite Bone Scaffold Based on Polycaprolactone and Sulfonated Silk Fibroin Nanofibers [Volume 10, Issue 1, 2021, Pages 75-84]
Cathodic electrodeposition
Electrochemical Synthesis of Yttrium Aluminum Garnet Nanostructures in the Presence of Cationic Surfactant: CTAB [Volume 10, Issue 2, 2021, Pages 13-19]
Ceramic Coating
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Chitosan Nanoparticles
Fabrication and Characterization of Properties of Silk Fibroin Scaffold Containing Ascorbic Acid-Loaded Chitosan Nanoparticles for Bone Regeneration Applications [Volume 10, Issue 4, 2021, Pages 25-36]
CIS Nanoparticles Ink
Performance Improvement in Solution Based CuInS2 Solar Cell by Optimizing the Absorber Layer Deposition [Volume 10, Issue 1, 2021, Pages 45-52]
Cold isostatic press
Structural Optimization of Cordierite Ceramics Prepared via Cold Isostatic Pressing of Polymer and TiO2 [Volume 10, Issue 3, 2021, Pages 35-44]
Composite
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
COMSOL Multyphysics Software
Investigation of the Effect of Phantom Size and Ferromagnetic Core of Ni-Cu Alloy on the Amount of Induction Heating in the Thermotherapy Process Using Comsol Multyphysics® Software [Volume 10, Issue 4, 2021, Pages 107-114]
Conductive polymer
The Effect of 304 Stainless Steel Substrate Surface Preparation Method on Coating Process of Polypyrrole/Polyaniline Conductive Polymers and Corrosion Resistance Improvement [Volume 10, Issue 2, 2021, Pages 33-44]
Co-precipitation
Fabrication of a Converter for Converting of Vibrational Energy to Electrical Energy Using Fe3O4 Ferrofluid [Volume 10, Issue 1, 2021, Pages 65-74]
Cordierite
Structural Optimization of Cordierite Ceramics Prepared via Cold Isostatic Pressing of Polymer and TiO2 [Volume 10, Issue 3, 2021, Pages 35-44]
Cu-doped ZnO
Effect of Copper Ion Incorporation on Structure and Antibacterial Properties of ZnO Nanoparticles [Volume 10, Issue 1, 2021, Pages 53-63]
CZTS
Investigation of Electrical and Optical Properties of CZTS with Doping of the Fifth Group Elements of the Periodic Table: A Density Functional Theory Study [Volume 10, Issue 3, 2021, Pages 67-78]
D
Density functional theory
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
Density of state
Investigation of Electrical and Optical Properties of CZTS with Doping of the Fifth Group Elements of the Periodic Table: A Density Functional Theory Study [Volume 10, Issue 3, 2021, Pages 67-78]
Dielectric properties
Determination of Dielectric and Optical Properties of Zeolitic Imidazolate Framework-8 (ZIF-8) by Reflection Electron Energy Loss Spectroscopy (REELS) [Volume 10, Issue 4, 2021, Pages 1-7]
Drug release
Synthesis and Characterization of Modified SiO2 Nanofibers to Evaluate the Release of Doxorubicin (DOX) Anticancer Drug [Volume 10, Issue 1, 2021, Pages 25-32]
E
Electrical Properties
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
Electroless
The Effect P Content of High and Low Temperature Heat Treatment on the Properties of Ni-P-GO Electroless Nanocomposite Coating on Magnesium Alloy [Volume 10, Issue 1, 2021, Pages 33-44]
Electrolyte
Electrochemical Synthesis of Yttrium Aluminum Garnet Nanostructures in the Presence of Cationic Surfactant: CTAB [Volume 10, Issue 2, 2021, Pages 13-19]
Electrospinning
Synthesis and Characterization of Modified SiO2 Nanofibers to Evaluate the Release of Doxorubicin (DOX) Anticancer Drug [Volume 10, Issue 1, 2021, Pages 25-32]
Energy Harvester
Fabrication of a Converter for Converting of Vibrational Energy to Electrical Energy Using Fe3O4 Ferrofluid [Volume 10, Issue 1, 2021, Pages 65-74]
F
Fabrication method
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
Fish Bone
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
Formation Energy
Investigation of Electrical and Optical Properties of CZTS with Doping of the Fifth Group Elements of the Periodic Table: A Density Functional Theory Study [Volume 10, Issue 3, 2021, Pages 67-78]
Freeze casting
Fabrication of Nanostructured Apatite Scaffolds by Freeze-Casting Method for Bone Tissue Engineering [Volume 10, Issue 2, 2021, Pages 21-31]
G
Gamma irradiation
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
Grain Size
Effect of Superheat Temperature on the Microstructure and Corrosion Behavior of Al-Zn-In Sacrificial Anode Produced by Semi-Solid Cooling Slope Casting [Volume 10, Issue 4, 2021, Pages 77-87]
H
Heat treatment
The Effect P Content of High and Low Temperature Heat Treatment on the Properties of Ni-P-GO Electroless Nanocomposite Coating on Magnesium Alloy [Volume 10, Issue 1, 2021, Pages 33-44]
Heterojunction
Design and Simulation of AlGaN/GaN High Electron Mobility Field-Effect Diode [Volume 10, Issue 2, 2021, Pages 59-69]
High temperature and pressure
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
Hot extrusion
Investigation on the Microstructure and Tensile Properties of Al5083-TiB2 Nanocomposites Produced by Stir Casting Method [Volume 10, Issue 2, 2021, Pages 45-57]
Hydrothermal route
Hydrothermal Synthesis and Pseudocapacitive Performance of β-NiMoO4 Nanorods [Volume 10, Issue 3, 2021, Pages 57-65]
Hydroxide film
Electrochemical Synthesis of Yttrium Aluminum Garnet Nanostructures in the Presence of Cationic Surfactant: CTAB [Volume 10, Issue 2, 2021, Pages 13-19]
Hydroxyapatite
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
I
IN718 Superalloy
The Effect of Cooling Rate After Full Solution and Aging Time on Microstructure and Hardness of IN718 Superalloy Fabricated via SLM [Volume 10, Issue 2, 2021, Pages 1-11]
Infrared Spectroscopy (FTIR)
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
ION/IOFF ratio
Design and Simulation of AlGaN/GaN High Electron Mobility Field-Effect Diode [Volume 10, Issue 2, 2021, Pages 59-69]
L
Leakage
Design and Simulation of AlGaN/GaN High Electron Mobility Field-Effect Diode [Volume 10, Issue 2, 2021, Pages 59-69]
Line Tension
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
M
Macro porous
Fabrication of Nanostructured Apatite Scaffolds by Freeze-Casting Method for Bone Tissue Engineering [Volume 10, Issue 2, 2021, Pages 21-31]
Magnetite
Fabrication of a Converter for Converting of Vibrational Energy to Electrical Energy Using Fe3O4 Ferrofluid [Volume 10, Issue 1, 2021, Pages 65-74]
Mechanical and thermodynamic properties
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
Mechanical properties
Structural Optimization of Cordierite Ceramics Prepared via Cold Isostatic Pressing of Polymer and TiO2 [Volume 10, Issue 3, 2021, Pages 35-44]
Mesenchymal stem cell
Enhanced Biomineralization of Stem Cells and Adsorption of Extracellular Matrix Proteins on Bioactive Scaffold Reinforced with Carboxylated Multi-Walled Carbon Nanotubes [Volume 10, Issue 4, 2021, Pages 89-106]
Microstructure
The Effect of Cooling Rate After Full Solution and Aging Time on Microstructure and Hardness of IN718 Superalloy Fabricated via SLM [Volume 10, Issue 2, 2021, Pages 1-11]
Microstructure
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Multiple Drug Resistant (MDR)
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
Multi-walled carbon nanotubes
Enhanced Biomineralization of Stem Cells and Adsorption of Extracellular Matrix Proteins on Bioactive Scaffold Reinforced with Carboxylated Multi-Walled Carbon Nanotubes [Volume 10, Issue 4, 2021, Pages 89-106]
N
Nano Droplet
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
Nanoparticles
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
Nanorods
Hydrothermal Synthesis and Pseudocapacitive Performance of β-NiMoO4 Nanorods [Volume 10, Issue 3, 2021, Pages 57-65]
Nanostructure
Fabrication of Nanostructured Apatite Scaffolds by Freeze-Casting Method for Bone Tissue Engineering [Volume 10, Issue 2, 2021, Pages 21-31]
Nanostructures
Electrochemical Synthesis of Yttrium Aluminum Garnet Nanostructures in the Presence of Cationic Surfactant: CTAB [Volume 10, Issue 2, 2021, Pages 13-19]
Nickel molybdate
Hydrothermal Synthesis and Pseudocapacitive Performance of β-NiMoO4 Nanorods [Volume 10, Issue 3, 2021, Pages 57-65]
Nitrate
Optimization of Nitrate Removal from Aqueous Solutions with ZSM Hierarchical Zeolite Modified with Amine Using Response Surface Method [Volume 10, Issue 1, 2021, Pages 13-23]
Nutrient Agar
Investigation of Antibacterial Properties of Titanium Dioxide Nano Colloids on the Surface of Historical Cotton Fabrics [Volume 10, Issue 3, 2021, Pages 15-24]
O
Oleic acid
Fabrication of a Converter for Converting of Vibrational Energy to Electrical Energy Using Fe3O4 Ferrofluid [Volume 10, Issue 1, 2021, Pages 65-74]
Optical properties
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
Optical properties
Investigation of Electrical and Optical Properties of CZTS with Doping of the Fifth Group Elements of the Periodic Table: A Density Functional Theory Study [Volume 10, Issue 3, 2021, Pages 67-78]
Optical properties
Determination of Dielectric and Optical Properties of Zeolitic Imidazolate Framework-8 (ZIF-8) by Reflection Electron Energy Loss Spectroscopy (REELS) [Volume 10, Issue 4, 2021, Pages 1-7]
Optimizing the Absorber Layer Deposition
Performance Improvement in Solution Based CuInS2 Solar Cell by Optimizing the Absorber Layer Deposition [Volume 10, Issue 1, 2021, Pages 45-52]
P
Partial Wetting
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
Phosphate-Based Electrolyte
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Pinning Force
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
Planar perovskite solar cell
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
Plasma electrolytic oxidation
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Polyaniline
The Effect of 304 Stainless Steel Substrate Surface Preparation Method on Coating Process of Polypyrrole/Polyaniline Conductive Polymers and Corrosion Resistance Improvement [Volume 10, Issue 2, 2021, Pages 33-44]
Polypyrrole
The Effect of 304 Stainless Steel Substrate Surface Preparation Method on Coating Process of Polypyrrole/Polyaniline Conductive Polymers and Corrosion Resistance Improvement [Volume 10, Issue 2, 2021, Pages 33-44]
REELS
Determination of Dielectric and Optical Properties of Zeolitic Imidazolate Framework-8 (ZIF-8) by Reflection Electron Energy Loss Spectroscopy (REELS) [Volume 10, Issue 4, 2021, Pages 1-7]
Response surface methodology (RSM)
Optimization of Nitrate Removal from Aqueous Solutions with ZSM Hierarchical Zeolite Modified with Amine Using Response Surface Method [Volume 10, Issue 1, 2021, Pages 13-23]
RF Sputtering
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
S
Scanning electron microscopy (SEM)
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
Semi-Solid Cooling Slope Casting
Effect of Superheat Temperature on the Microstructure and Corrosion Behavior of Al-Zn-In Sacrificial Anode Produced by Semi-Solid Cooling Slope Casting [Volume 10, Issue 4, 2021, Pages 77-87]
Silk fibroin
Fabrication and Characterization of Properties of Silk Fibroin Scaffold Containing Ascorbic Acid-Loaded Chitosan Nanoparticles for Bone Regeneration Applications [Volume 10, Issue 4, 2021, Pages 25-36]
Small wind turbine
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
SnO2
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
Solar Cell
Performance Improvement in Solution Based CuInS2 Solar Cell by Optimizing the Absorber Layer Deposition [Volume 10, Issue 1, 2021, Pages 45-52]
Sphericity Number
Effect of Superheat Temperature on the Microstructure and Corrosion Behavior of Al-Zn-In Sacrificial Anode Produced by Semi-Solid Cooling Slope Casting [Volume 10, Issue 4, 2021, Pages 77-87]
Staphylococcus aureus
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
Sulfonated silk fibroin
Preparation and Characterization of Composite Bone Scaffold Based on Polycaprolactone and Sulfonated Silk Fibroin Nanofibers [Volume 10, Issue 1, 2021, Pages 75-84]
Supercapacitors
Hydrothermal Synthesis and Pseudocapacitive Performance of β-NiMoO4 Nanorods [Volume 10, Issue 3, 2021, Pages 57-65]
T
TeO2
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
Thin film
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
TiO2
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
TiO2
Structural Optimization of Cordierite Ceramics Prepared via Cold Isostatic Pressing of Polymer and TiO2 [Volume 10, Issue 3, 2021, Pages 35-44]
Titanium
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Titanium Carbide
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
Titanium diboride
Investigation on the Microstructure and Tensile Properties of Al5083-TiB2 Nanocomposites Produced by Stir Casting Method [Volume 10, Issue 2, 2021, Pages 45-57]
Titanium oxide nanoparticles
Investigation of Antibacterial Properties of Titanium Dioxide Nano Colloids on the Surface of Historical Cotton Fabrics [Volume 10, Issue 3, 2021, Pages 15-24]
Triple-Phase Contact Line
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
U
Urtica diocia
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
W
Wet chemical method
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
WO3
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
Wood
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
X
X-ray diffraction (XRD)
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
Z
Zeolite
Optimization of Nitrate Removal from Aqueous Solutions with ZSM Hierarchical Zeolite Modified with Amine Using Response Surface Method [Volume 10, Issue 1, 2021, Pages 13-23]
ZIF-8
Determination of Dielectric and Optical Properties of Zeolitic Imidazolate Framework-8 (ZIF-8) by Reflection Electron Energy Loss Spectroscopy (REELS) [Volume 10, Issue 4, 2021, Pages 1-7]
Zirconium Carbide
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
ZnO
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
ZnO nanoparticles
Effect of Copper Ion Incorporation on Structure and Antibacterial Properties of ZnO Nanoparticles [Volume 10, Issue 1, 2021, Pages 53-63]
